Perbandingan kinerja teknik sampling ATR-FTIR dan DRS-FTIR untuk identifikasi mikroplastik PE, PP, PS, dan PET
DOI:
https://doi.org/10.24246/juses.v9i2p186-198Keywords:
ATR-FTIR, DRS-FTIR, Identifikasi polimer, MikroplastikAbstract
Mikroplastik merupakan polutan persisten yang banyak ditemukan di lingkungan dan memerlukan metode identifikasi yang akurat untuk menentukan jenis polimernya. Penelitian ini bertujuan membandingkan karakteristik spektral yang diperoleh dari dua konfigurasi sampling FTIR, yaitu Attenuated Total Reflection (ATR) dan Diffuse Reflectance Spectroscopy (DRS), pada polimer mikroplastik polyethylene (PE), polypropylene (PP), polystyrene (PS), dan polyethylene terephthalate (PET) dalam bentuk pejal dan serbuk, serta mengevaluasi pengaruh bentuk sampel terhadap baseline dan fitur puncak pada kondisi pengukuran yang digunakan. Sampel mikroplastik diperoleh dari limbah plastik pascakonsumsi yang disintesis menggunakan metode solvent dissolution-precipitation. Karakterisasi dilakukan menggunakan ATR-FTIR dan DRS-FTIR pada rentang bilangan gelombang 4000–400 cm⁻¹ dengan resolusi 4 cm⁻¹ dan 40 kali pemindaian. Hasil penelitian menunjukkan bahwa seluruh sampel menampilkan puncak serapan karakteristik yang sesuai dengan literatur, meliputi gugus CH₂ pada PE, gugus CH₃ pada PP, cincin aromatik pada PS, serta gugus karbonil ester dan C–O–C pada PET. ATR-FTIR menghasilkan spektrum dengan baseline yang lebih baik pada rentang 95–100 %T dan intensitas serapan puncak yang jelas (transmitansi mencapai 20 %T pada 1715 cm⁻¹ untuk PET dan 756 cm⁻¹ untuk PS). Sementara itu, DRS-FTIR menunjukkan performa yang baik pada sampel PP serbuk dengan puncak karakteristik yang lebih jelas. Pada DRS-FTIR terjadi distorsi optik pada sampel pejal dengan lonjakan baseline mencapai 130–250 %T, serta penurunan baseline pada sampel serbuk hingga 20 %T. Hasil penelitian menunjukkan bahwa ATR-FTIR merupakan metode sampling yang menghasilkan kualitas spektrum paling optimal, ditandai dengan garis dasar (baseline) yang stabil (95–100 %T) dan puncak serapan karakteristik yang jelas untuk sampel PE, PS, dan PET, baik dalam wujud pejal maupun serbuk. Sebaliknya, DRS-FTIR menunjukkan puncak karakteristik yang lebih baik khusus pada sampel PP berwujud serbuk, tetapi mengalami distorsi optik (baseline 130–250 %T) pada sampel pejal akibat pantulan spekular.
Downloads
References
Baharuddin, A., Asran, A., & Ikhtiar, M. (2023). Spasial analisis mikroplastik dengan metode FT-IR (Fourier Transform Infrared) pada feses petani kerang hijau. Window of Health: Jurnal Kesehatan, 6(3), 331–343.
Coates, J. (2000). Interpretation of infrared spectra, a practical approach. In R. A. Meyers (Ed.), Encyclopedia of analytical chemistry (pp. 10815–10837). Wiley. https://doi.org/10.1002/9780470027318.a5606 DOI: https://doi.org/10.1002/9780470027318.a5606
Cowger, W., Gray, A., Christiansen, S. H., DeFrond, H., Deshpande, A. D., Hemabessiere, L., Lee, E., Mill, L., Munno, K., Ossmann, B. E., Pittroff, M., Rochman, C., Sarau, G., Tarby, S., & Primpke, S. (2020). Critical review of processing and classification techniques for images and spectra in microplastic research. Applied Spectroscopy, 74(9), 989–1010. https://doi.org/10.1177/0003702820929064 DOI: https://doi.org/10.1177/0003702820929064
Cunsolo, S., Williams, J., Hale, M., Read, D. S., & Couceiro, F. (2021). Optimising sample preparation for FTIR-based microplastic analysis in wastewater and sludge samples: Multiple digestions. Analytical and Bioanalytical Chemistry, 413(14), 3789–3799. https://doi.org/10.1007/s00216-021-03331-6 DOI: https://doi.org/10.1007/s00216-021-03331-6
Fan, C., Huang, Y.-Z., Lin, J.-N., & Li, J. (2021). Microplastic constituent identification from admixtures by Fourier-transform infrared (FTIR) spectroscopy: The use of polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC) and nylon (NY) as the model constituents. Environmental Technology & Innovation, 23, Article 101798. https://doi.org/10.1016/j.eti.2021.101798 DOI: https://doi.org/10.1016/j.eti.2021.101798
Griffiths, P. R., & de Haseth, J. A. (2007). Fourier transform infrared spectrometry (2nd ed.). Wiley. https://doi.org/10.1002/047010631X DOI: https://doi.org/10.1002/047010631X
Husnalia, N., Nugroho, S., & Adnan, F. (2023). Analisis keterkaitan kelimpahan mikroplastik dengan sampah plastik pada Sungai Mahakam di Desa Sebulu Modern Kecamatan Sebulu. Jurnal Teknologi Lingkungan UNMUL, 7(2), 1–10. https://doi.org/10.30872/jtlunmul.v7i2.10827 DOI: https://doi.org/10.30872/jtlunmul.v7i2.10827
Jung, M. R., Horgen, F. D., Orski, S. V., Rodriguez C., V., Beers, K. L., Balazs, G. H., Jones, T. T., Work, T. M., Brignac, K. C., Royer, S.-J., Hyrenbach, K. D., Jensen, B. A., & Lynch, J. M. (2018). Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms. Marine Pollution Bulletin, 127, 704–716. https://doi.org/10.1016/j.marpolbul.2017.12.061 DOI: https://doi.org/10.1016/j.marpolbul.2017.12.061
Käppler, A., Fischer, M., Scholz-Böttcher, B. M., Oberbeckmann, S., Labrenz, M., Fischer, D., Eichhorn, K.-J., & Voit, B. (2018). Comparison of μ-ATR-FTIR spectroscopy and py-GCMS as identification tools for microplastic particles and fibers isolated from river sediments. Analytical and Bioanalytical Chemistry, 410(21), 5313–5327. https://doi.org/10.1007/s00216-018-1185-5 DOI: https://doi.org/10.1007/s00216-018-1185-5
Karanam, K., Okoffo, E. D., Shukla, P., Thomas, K. V., & Rudolph, V. (2024). Preparation of polystyrene microplastic particles by solvent-dissolution-precipitation. Sustainable Chemistry for the Environment, 7, Article 100144. https://doi.org/10.1016/j.scenv.2024.100144 DOI: https://doi.org/10.1016/j.scenv.2024.100144
Kauts, S., Mishra, Y., Yousuf, S., Bhardwaj, R., Singh, S. K., Alshabrmi, F. M., Abdurahman, M., Vamanu, E., & Singh, M. P. (2023). Toxicological profile of polyethylene terephthalate (PET) microplastic in ingested Drosophila melanogaster (Oregon R+) and its adverse effect on behavior and development. Toxics, 11(9), Article 782. https://doi.org/10.3390/toxics11090782 DOI: https://doi.org/10.3390/toxics11090782
Mirabella, F. M., Jr. (Ed.). (1998). Modern techniques in applied molecular spectroscopy. Wiley.
Morgado, V., Gomes, L., Bettencourt da Silva, R. J. N., & Palma, C. (2021). Validated spreadsheet for the identification of PE, PET, PP and PS microplastics by micro-ATR-FTIR spectra with known uncertainty. Talanta, 234, Article 122624. https://doi.org/10.1016/j.talanta.2021.122624 DOI: https://doi.org/10.1016/j.talanta.2021.122624
Nunes, C. A., Freitas, M. P., Pinheiro, A. C. M., & Bastos, S. C. (2012). Chemoface: A novel free user-friendly interface for chemometrics. Journal of the Brazilian Chemical Society, 23(11), 2003–2010. https://doi.org/10.1590/S0103-50532012005000073 DOI: https://doi.org/10.1590/S0103-50532012005000073
Pungut, P., Widyastuti, S., & Wiyarno, Y. (2021). Identifikasi mikroplastik pada cangkang kerang darah (Anadara granosa Liin) dengan menggunakan Fourier Transform Infrared (FTIR) dan Scanning Electron Microscopy (SEM). Seminar Nasional Hasil Riset dan Pengabdian (SNHRP), 3, 109–120. https://snhrp.unipasby.ac.id/prosiding/index.php/snhrp/article/view/177
Renner, G., Schmidt, T. C., & Schram, J. (2018). Analytical methodologies for monitoring micro(nano)plastics: Which are fit for purpose? Current Opinion in Environmental Science & Health, 1, 55–61. https://doi.org/10.1016/j.coesh.2017.11.001 DOI: https://doi.org/10.1016/j.coesh.2017.11.001
Shim, W. J., Hong, S. H., & Eo, S. E. (2017). Identification methods in microplastic analysis: A review. Analytical Methods, 9(9), 1384–1391. https://doi.org/10.1039/C6AY02558G DOI: https://doi.org/10.1039/C6AY02558G
Soares, I., França de Sá, S., & Ferreira, J. L. (2020). A first approach into the characterisation of historical plastic objects by in situ diffuse reflection infrared Fourier transform (DRIFT) spectroscopy. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 240, Article 118548. https://doi.org/10.1016/j.saa.2020.118548 DOI: https://doi.org/10.1016/j.saa.2020.118548
Subramani, M., & Sepperumal, U. (2016). FTIR analysis of bacterial mediated chemical changes in polystyrene foam. Annals of Biological Research, 7(5), 55–61. DOI: https://doi.org/10.1016/j.polymertesting.2016.08.005
Suprijanto, J., Senduk, J. L., & Makrima, D. B. (2021). Penggunaan Fourier Transform Infrared untuk analisis mikroplastik pada Loligo sp. dan Rastrelliger sp. dari TPI Tambak Lorok Semarang. Buletin Oseanografi Marina, 10(3), 291–298. https://doi.org/10.14710/buloma.v10i3.38964 DOI: https://doi.org/10.14710/buloma.v10i3.38964
Zulfaiz, S. K., & Aliviyanti, D. (2025). Identifikasi mikroplastik menggunakan FTIR (Fourier Transform Infra Red) pada Atyidae di Kali Surabaya. Environmental Pollution Journal, 5(3), 348–356. https://doi.org/10.58954/epj.v5i3.328 DOI: https://doi.org/10.58954/epj.v5i3.328
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Sains dan Edukasi Sains

This work is licensed under a Creative Commons Attribution 4.0 International License.









